Search what you need...
EN

Last updated 17 Dec, 2025

Detail Specifications’ Seawind 1160 Resort

Technical specifications and detailed information about the model that you will need to read carefully.

Seawind 1160 Resort (38' / 11.6m)

Standard Specfications and Equipment

GENERAL: 

The 1160 Resort has been developed to meet the ever demanding needs of modern-day charter operations. Keeping things simple, the Resort offers a low maintenance high capacity 38ft catamaran at an entry level price. Perfect for any day charter operation around the world!

EXTERIOR / LAMINATE:

  • Finish: Full female moulded hulls & decks, exterior gelcoat finish with moulded-in non-slip surface on deck areas
  • Hull Laminate: Infused Vinyl Ester (Modified epoxy) resin laminate of the entire hull laminate
  • Hull Core Material: PVC closed cell foam core
  • Deck Laminate: Vacuum formed polyester resin resin laminate
  • Deck Core Material: PVC closed cell foam core
  • General Laminate: Vacuum formed polyester resin resin laminate
  • General Core Material: PVC closed cell foam core
  • Laminate specifications are certified to International CE standards

MAST/BOOM/SAILS:

  • Clear anodised aluminium mast and boom. Single Spreader, 7/8 rig
  • Standing Rigging:

– Forestay 3/8 (10mm) 1 x 19 Dyform wire

– Sidestays 3/8 (10mm) 1 x 19 Dyform wire

– Diamonds 5/16 (8mm) 1 x 19 Stainless Steel wire

  • Halyards:

– Main halyard: 12mm Spectra rope : Heavy duty shackle

– Jib halyard: 8mm Spectra rope. Heavy duty shackle

– Topping lift: 8mm rope. Heavy duty shackle

– Boom outhaul: 10mm Spectra

  • Single line reefing, run to helm. Three reefing points with 2 reef lines:

– Reef 1&3: 10mm rope. Leech/Clew blocks and snap shackle

– Reef 2: 10mm rope. Heavy duty shackle

  • Sheets:

– Main sheet: 10mm rope

– Main traveller control:  8mm rope

– Jib sheet: 10mm rope

  • Reefing lines and sheets to be lead back to cockpit through turning blocks and rope clutches
  • Fully battened mainsail. Triple stitched reinforced construction. Leach adjustable batten end caps. Fibreglass sail battens
  • Mainsail cover with integrated lazy jack system

DECK EQUIPMENT:

  • 6 x Docking cleats. Each side : bow, stern & amidships
  • 1 x Heavy duty mooring cleat on forward walkway
  • Sheet winches : 2 x 45ST – 2 speed self tailing
  • Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 life-lines.  With 700mm high lifelines to meet CE requirements.
  • 2 x transom access gates with pelican hook releases
  • 2 x side access gates with pelican hook releases
  • Aft swim ladder: folding stainless aft swim ladder

FORWARD BEAM, CATWALK AND TRAMPOLINES:

  • Carbon reinforced fwd beam
  • Pelican striker and adjustable cable
  • 1 x Mooring plate above foredeck
  • 2 x Anchor roller under deck. Permanent stowage position for 45lb Plough (CQR/Delta type) anchor  (cheeks 75mm high)
  • Catwalk in pvc foam-sandwich fibreglass
  • Light weight plastic coated open netted trampolines

AFT BEAM AND DECK:

  • Curved mainsheet track and continuous line traveller control system
  • Composite seats behind aft beam
  • Full width hard top over cockpit

STEERING SYSTEM:

  • Central helm station
  • 32” stainless steel steering wheel

INTERIOR FINISH:

  • Flowcoat interior finish
  • Lightweight cupboard doors and trimmings

 GALLEY:

  • Spacious galley with scratch resistant counter surfaces
  • Double bowl stainless steel sink
  • Pressure fresh water system
  • Top loading Ice Box
  • Under bench storage

PORT HEAD:

  • Light weight pvc foam cored door
  • Manual toilet. Discharge via holding tank
  • Holding tank built in. Discharge pump out by shore station or directly overboard 130L
  • Pipes, skin fittings and sea-cocks are easily accessible and to meet survey requirements
  • Vanity basin with pressure water
  • Large quantity cupboards

LIGHTING/ELECTRICAL SYSTEM:

  • High quality DC electrical switch panel with circuit breakers, LED indicator lights and voltage display
  • Marine grade tinned electrical wiring with extensive use of heat sealed connectors
  • Batteries x 3 comprising: House System (260 amp hrs) : 2 x 130 amp hr heavy duty batteries One engine cranking battery – 130 amp hr heavy duty battery
  • 230amp heavy duty isolation switch
  • 12 V lighting : Numerous 12V interior lamps and courtesy lights throughout including recessed lights in cockpit
  • 4 x 12V Outlets
  • CE approved navigation lights. Port & Starboard mounted on bow rails
  • Deck floodlight mounted on spreaders
  • Mast head anchor / riding light
  • 2 x 120W Solar panels and solar regulator

PLUMBING / FRESH WATER TANKS:

  • Pressure water system with water to galley and bathrooms
  • Fresh water tank: 430 litres ( 112 gallons). Remote deck filler
  • Electric fresh water pump
  • Electric bilge pumps (2) with controls integral with master battery switch panel
  • Manual bilge pumps (2) in each hull
  • New Marelon through-hull fittings to CE/ISO standard
  • Manual toilet in head

 ENGINES:

  • Twin Yamaha 25hp 20” engines. Mounted under aft seating
  • 5” leg extensions added to engines to reduce cavitation
  • Remote electric key start with electric tilt fitted
  • Dual engine controls at helm station
  • 200l fuel tank

NAVIGATION:

  • Steering compass

ANCHORING / MOORING:

  • Primary anchor is 45 lb Delta anchor type with 15 mtrs x 8mm short link galvanised chain and 40 mtrs x 16mm triple braid anchor warp
  • Primary anchor is stored in a specially designed anchor roller under the forward beam
  • 3 x PVC Inflatable Fenders
  • 3 x Mooring lines (each 15 mtrs x 14mm)

 ANTIFOULING / STRIPING:

  • Epoxy barrier coat plus 2 coats of high quality black antifouling bottom paint
  • Seawind 1160 Resort decal on each hull and stern

DISCLAIMER: The specifications above may change at Seawind Catamaran’s discretion.

Service and Support Enquiry

For service, warranty, maintainance or repair enquiries related to your Seawind catamaran.

First name *

Last name *

Email *

Phone number

Leave us a message